Theiling Theiling Rollermat Compact 1

Product Description

Rollermat Compact 1, Compact Automatic Fine Filter for Saltwater and Freshwater Aquariums

The Rollermat Compact I removes impurities from the aquarium water, thereby reducing the load on the biological filter. The result is clear water and healthy fish. The water is filtered through a fine filter fleece and automatically fed through by a roller. The pores of the filter fleece are so fine that even many single-celled parasites can be trapped.

Features of the Rollermat Compact I:

• Efficient mechanical filtration via a fine filter fleece

• Automatic removal of contaminated filter fleece

• Easy roll replacement

• The roll is 10 cm wide and allows a water flow rate of up to 2,000 L/hr—depending on water quality

• Minimal power consumption, averaging less than 0.1 W.

• 12 V safety voltage

Dimensions:
30 cm wide, 52 cm high (with base), depth 22 cm; height without base: 46 cm. Footprint when installed without base: 14 x 13 cm

When installing, add an additional 10 cm to the height so that the roll can be replaced easily. When placed in the filter tank, the water level must not rise higher than 10 cm.

How it works:

The dirty water is directed through the inlet into the dirt chamber. It passes through the
filter media and flows back into the filter sump. When the filter media becomes clogged with dirt, the water flow rate through the media decreases and the water level in the dirt chamber rises.

As soon as a certain water level is reached, a float switch activates the gear motor, and the filter fleece is unwound a little further. Fully automatic! Depending on the amount of debris in the aquarium, a roll of filter fleece lasts 3–6 months. Once it becomes dirty, it must be replaced with a new one.

The filter fleece is very fine. Even the smallest particles are trapped. The debris is removed from the system before it undergoes biological breakdown. This reduces the load on the biofilter and the skimmer in the saltwater aquarium.
If the collection roll is full—or the dispenser roll is empty—it can simply be removed from the filter and replaced.